CAA extends pilot training on permit aircraft
PUBLISHED: 10:55 30 November 2015 | UPDATED: 10:55 30 November 2015
On 27 November the UK Civil Aviation Authority (CAA) announced that initial pilot training will now be possible in aircraft with national permit to fly certification if the pilot being trained is the owner, or a joint owner, of the aircraft being used.
The announcement builds on previous exemptions from the UK Air Navigation Order to allow aircraft on a permit to fly to be used for flight training. Under the changes the pilot being trained must be at least a part owner of the aircraft (the current rules allow for a maximum of 20 owners of an individual aircraft).
If the training is for a European Aviation Safety Agency pilot licence or rating then it must be undertaken through an approved training organisation or a registered training facility. If the training facility is content this could still be carried out using the pilot’s own aircraft.
Tony Rapson, Head of the CAA’s GA Unit said: “This exemption is part of our commitment to bring in changes in advance of any future amendments to the Air Navigation Order that result from our recent review and consultation which is part of our ongoing GA change programme to make our regulation of GA proportionate and risk based.”
Welcoming the change Geoff Weighell, Chief Executive of the British Microlight Aircraft Association (BMAA) said: “The BMAA has engaged with and supported the CAA in bringing forward this change, which is consistent with the regulatory approach of enabling reasonable risk based decisions to be made by members of the GA community. It will enable part-owners of microlights to build and learn to fly in their own aircraft, encouraging new pilots and therefore providing a boost to training schools and aircraft suppliers.”
The exemption is available at training exemption
For further media information contact the CAA Press Office on: 00 44 (0)207 453 6030. firstname.lastname@example.org
If you value what this gives you, please consider supporting our work. Click the link in the yellow box below for details.